Installation Ideas
See installation ideas below. Our aluminum panels, screens, fence toppers, and gates are designed for simple, secure installation.
General Installation Instructions
Before installing any panel, confirm your measurements, check alignment, and ensure the surface or structure is suitable for mounting.
💡 Installation Tips
- ✓ Measure twice before drilling
- ✓ Keep panels level and evenly spaced
- ✓ Use structural support for larger panels
- ✓ Always use weather-resistant hardware
- ✓ For panels over 6', consider 3/16" or thicker material
Mounting Options & Hardware
We support various mounting systems depending on application. Stainless steel or outdoor-coated hardware is recommended.
Predrilled Holes
Standard option. Holes around perimeter for direct screw mounting to flat surfaces.
Countersink Holes
Flush screw heads for a cleaner, more discrete appearance.
Bent Tabs (90°)
Tabs for mounting to posts or between surfaces.
Flanges (90°)
Full-length bent flange for stability and panel-to-panel connection.
L-Brackets
Separate brackets for sideways mounting or engineered screen installations.
Baseplate Post
Posts with welded base plate for surface mounting.
In-ground Post
Posts for cement installation directly into the ground.
Wall Mount Post
Posts designed for wall attachment.
Stand-off Mounts
Creates ~3/4" gap between wall and panel for floating effect.
Note: Hardware is provided for gates, posts, and brackets. Additional hardware for some surfaces can be included on request. Use weather-resistant screws/bolts appropriate for your surface material.
Fence Topper Mounting Options
Different ways to install fence toppers on your existing fence.
Direct Mount
Direct mount — panel attached directly to the fence
Direct mount — panel attached directly to the fence
Sandwich Mount
Empty sandwich frame
Completed sandwich installation
Tabs Mount
Tabs — close up
Tabs — installed view
Flange Mount
Flange — side view
Flange — side view
Flange — front view (installed)
Posts plus panel with Tabs or Flanges
You can use our small posts together with the tabs or flanges option in order to install the fence topper on top of the fence.
Fence topper with small posts
Fence topper with small posts
Fence topper with small posts
Welded Frame
Welded frame - side attached to post
Panel Mounting Options
Different ways to install privacy panels and decorative screens.
Direct to Wall
Direct mount — panel attached directly to wall
Direct mount — panel attached directly to wall
Sandwich Mount
Empty sandwich frame
Completed sandwich installation
countersink holes
Completed installation
Completed installation
Tabs
Tabs — close up
Tabs — full panel view
Tabs — back view
Flanges
You can mount flanges to the post or to another flange.
Flange — front view
Flange — mounted to post
Flange — mounted to another flange
L-Brackets
L-bracket — close up (back view)
L-bracket — installed (engineered screens)
Clips
We don't sell clips, but they can be used for installation.
Clips — close up
Panels installed with clips
Stand-offs
Stand-off — side view
Stand-off — front view (installed)
Post Installation
Posts can be used together with panels for freestanding installations.
Baseplate Posts
Baseplate post — in progress
Baseplate post — completed
In-ground Posts
For in-ground posts, you need to drill holes, fill with cement, then install the posts.
Drilling holes and filling with cement
Installing posts
Finished installation with panels
Gate Installation
Our gates are installed using two posts, or your own posts if they're suitable.
Gate installed with two posts
Gate - before installation
Gate - after installatio
Tools Required
Safety Guidelines
Follow these safety recommendations when installing metal panels.
- ⚠Wear gloves when handling metal panels — edges may be sharp
- âš Use protective eyewear when drilling
- âš Ensure ladders are stable and properly supported
- âš Do not install in wet or slippery conditions
- âš For heavy panels, use two people for lifting
- âš Keep children away from installation area
Important: Panels may have sharp edges. These panels are decorative and are not designed to be climbed on by children, adults, or pets.
Installation FAQ
Can I install the panels myself?
Yes, most installations can be completed with standard tools by DIY homeowners. For complex installations, we recommend consulting a professional.
Do you provide mounting hardware?
Hardware is provided for gates, posts, and brackets. Additional hardware for specific surfaces can be included on request.
Can panels be installed on uneven surfaces?
Yes, with adjustment. You can use shims or custom brackets and mounting solutions.
Do you offer installation services?
We offer installation services across GTA region of Ontario. You can also find a contractor who can work with us directly.
What screws should I use?
Standard panels have pre-drilled holes that are 0.2 inches in diameter and use M5 screws. Use outdoor-rated, corrosion-resistant screws (stainless steel recommended).
How do I level a panel?
Use a spirit level on top of the panel before tightening all screws. Adjust as needed before final securing.
Need Help With Installation?
If you need assistance selecting the right mounting method or hardware, contact us for support. We also offer site visits and installations in the GTA region.
You can also reach us by email at lasercutarts.shopify@gmail.com
